SPECIALTY I/O

Specialized I/O modules are available for high speed counting and vibration monitoring applications.

Products

Filter By Series

  • 2500 Series - Classic(5)

2500 Series - Classic

2502 2-Channel High Speed Counter Input Module

2502 2-Channel High Speed Counter Input Module

The 2502 module provides two high-speed 16-bit counter channels in a compact, single-wide module to fit in the 2500 Series® I/O base.

The 2502 module provides two high-speed 16-bit counter channels in a compact, single-wide module to fit in the 2500 Series® I/O base.

down arrowMore Details

Price Unavailable - Contact Us for a Quote

QUANTITY
2553-A 2-Channel Mag Meter Input Module

2553-A 2-Channel Mag Meter Input Module

The 2553-A is designed for precise measurement of mag meter or turbine meter pulses both at low speeds and high speeds (Reflex Counter Mode). The...

The 2553-A is designed for precise measurement of mag meter or turbine meter pulses both at low speeds and high speeds (Reflex Counter Mode). The 2553-A can also be used to compensate for measurement errors due to wheel wobble (N-tooth counting mode).

down arrowMore Details

Price Unavailable - Contact Us for a Quote

QUANTITY
2554-A 4-Channel Isolated High Speed Counter Module

2554-A 4-Channel Isolated High Speed Counter Module

The 2554-A is an isolated 4-channel high-speed counter input module. Each channel can operate in one of three selectable modes: frequency, period...

The 2554-A is an isolated 4-channel high-speed counter input module. Each channel can operate in one of three selectable modes: frequency, period, or general counter. In addition, two channels may be configured together for quadrature mode operation.

down arrowMore Details

Price Unavailable - Contact Us for a Quote

QUANTITY
Programmable Limit Switch Module

Programmable Limit Switch Module

Autotech M8250 Series PLC Bus Modules - NOTE: this link will take you to AutoTtech Controls website This product is purchased from and supported...

Autotech M8250 Series PLC Bus Modules - NOTE: this link will take you to AutoTtech Controls website This product is purchased from and supported by Autotech.

down arrowMore Details

Price Unavailable - Contact Us for a Quote

QUANTITY
2505 Vibration Sensor Interface Module

2505 Vibration Sensor Interface Module

The 2505 Vibration Sensor Interface Module provides four vibration inputs to the 2500 Series® I/O base. The module is configurable to interface...

The 2505 Vibration Sensor Interface Module provides four vibration inputs to the 2500 Series® I/O base. The module is configurable to interface to accelerometers, velocity probes, or proximity probes plus a tachometer input. The module calculates the RMS and true peak value of the overall vibration on each channel and presents this value to the controller via the I/O backplane.

down arrowMore Details

Price Unavailable - Contact Us for a Quote

QUANTITY

 
x